CelCulture® CO2 Incubators

• Best uniformity and control among competition
• Fast CO2, temperature and humidity recovery without overshoot
• Direct heat design for rapid recovery, with 8 heater grouped into 3 zones
• Air jacket provides isolation against ambient temperature fluctuations
• VentiFlow™ forced convection accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination
• Filtered air circulates across water pan to accelerate humidifying process
• Air flows gently around culture plates, causing no disturbance to cell culture
• Blower automatically stops when door is opened, to minimize mixing of chamber and room air

• SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 condition.
• SwiftCon™ moist heat 90⁰C decontamination cycle operates overnight to eradicate any contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
• All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
• The incubator’s main body is made from electro-galvanized steel with Esco’s unique ISOCIDE antimicrobial coating.
• The interior of the chamber is made from stainless steel type 304.

• Comprehensive user-configurable alarms for all the parameters.
• CelAlert™ alarm system reminds user to replace CO2 tank and ULPA filter.
• Intelligent data and event logger records all incubator parameters for on screen recall.
• 16 MB built-in flash memory guarantees long term storage of data.
• Diagnostic interface and on line quick help provide comprehensive solutions to frequently. encountered problems.
• RS485 data output.

• Chamber is made of shiny stainless steel chamber with all rounded corners.
• Ductwork, plenums and shelves are removable without tools.
• Glass door is removable without tools.
• Inner gasket removable without tools.

• Diagnostic functions in the microprocessor include historical read-out of the parameters.
• Service can be carried out from the top/front
• Esco electronics and sensors have been expertly designed and paired to be inherently drift-free, to minimize need for calibration

CCL-170B-9
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, ULPA, High Temp Decon, 115VAC, 50/60HZ
CCL-170T-9
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, O2 Control ULPA, Moist Heat Decon, 115VAC, 50/60HZ

• COA-1001 : Humidity Display, Factory Installed
• COA-1001-F : Humidity Display, Field Install Kit
• COA-1002 : CO2 Backup (Tank Switcher), Factory Installed
• COA-1002-F : CO2 Backup (Tank Switcher), Field Installed
• COA-1004 : Reversed Door Swing, Factory Installed
• COA-1005 : Analog Outputs, Factory Installed
• COA-1005-F : Analog Outputs, Field Installed
• COA-1006-F : Sealed Inner Door Kit (4 Glass Doors With Latches), Field Installed

• COA-2001-F : Roller Base
• COA-2002-F : Floor Stand (6" Adjustable Feet)
• COA-2003-F : Floor Stand 700mm
• COA-2005-F : 2-Stage Gas Regulator for CO2/N2
• COA-2007-F : Extra Shelf, With 2 Support Rails
• COA-2008-F : Stacking Kit
• COA-2010-F : Electronic CO2 Analyzer (Worldwide), For CO2/Temp Measurement (With Temp. Probe)
• COA-2011-F : IQ/OQ Documentation
• COA-2012-F : 6" Chart Recorder, Temp, 115/230VAC 50/60HZ
• COA-2013-F : 8" Chart Recorder, Temp/Temp, 115/230VAC 50/60HZ
• COA-2014-F : 6" Chart Recorder, Temp/RH, 115/230VAC 50/60HZ
• COA-2015-F : Inner Door Shelving Kit (4 Sets With Total 12 Mini Shelves For One Incubator)

CCL CE Certificate
HPA Decontamination Certificate
HPA Decontamination Test Report

Brochure
CelCulture Brochure with 3 Sizes and Copper Interior Option
CO2 Incubator with Suppressed O2 Flyer
CO2 Incubators Poster
Electronic CO2 Analyzer Flyer
Flyer